Our MAS15 boiler automatically modulates the amount of watts required to meet the specific heating demand, as needed. It will never go above the pre-set watt maximum, meaning it is as cost effective as possible.
Our MAS15 wall mounted boiler is a heating only boiler, compatible with the Elnur Connected Range.
Coming away from mechanical switching, our next generation TRIAC switch ensures a smoother and quieter modulation.
| MODEL | MAS15 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Selectable Output kW | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 15 |
| kcal/h | 2580 | 3440 | 4300 | 5160 | 6020 | 6880 | 7740 | 8600 | 9460 | 10320 | 11180 | 12900 |
| Current 3 x 400 V+N~ A | 13.0 | 8.7 | 13.0 | 8.7 | 13.0 | 13.0 | 13.0 | 21.7 | 21.7 | 21.7 | 21.7 | 21.7 |
| *Current 230 V~ A | 14.0 | 17.4 | 21.7 | 26.1 | 30.4 | 34.8 | 39.1 | 43.5 | 47.8 | 52.2 | Ask | Ask |
| MODEL | MAC15 |
|---|---|
| Voltage V | 3×400 V+N / 220-240 |
| Frequency Hz | 50 |
| Insulation | Class 1 |
| Net weight kg | 29.5 |
| Dimensions(HxWxD) | 76cm x 35cm x 26.5cm |
| EAN13 | 8432336804700 |
*Using included bridge connection
Our Mattira electric boilers are unique in that they regulate energy consumption according to the heating needs of the installation. They take into account the room temperature, making it an even more comfortable boiler.
Connectivity in home heating can be completed by using any chronothermostat from the CTM WiFi range. This accessory allows you to remotely manage the boiler through the G Control System.
We would suggest firstly to check the set point temperature of the boiler, this could be set low and just needs to be increased this can be done via the plus key on the left hand side. Secondly I would suggest the Mixer valve is checked and increased as if this is too low then it can cause the water to only come out lukewarm. Increase the setting and test again.
If your heating is not working we would suggest checking your thermostat. The test for this would be to turn the thermostat above your usual temperature and see if the boiler starts up. If the boiler does not come on it is most likely a thermostat issue and it will need to be replaced. If the thermostat is working and is calling for the boiler to heat, check to see if the boiler is showing a temperature and that the boiler pressure is at 1.5 bar, if not refill using filling loop underneath. If your boiler is still not providing any heating after trying the above please call our technical line on 01942 670119 or email technical@elnur.co.uk
The modulating operation of Elnur Gabarron electric boilers is managed by an Intelligent Control Electronic Modulation System (EMS), which will regulate the output according to actual heat demand. The boiler will work for longer at minimum power and carry out fewer on/off operations, saving electricity consumption, compared with a system without modulation.
In order to modulate the boilers, an external thermostat must be connected. Modulation only occurs for the heating circuit, not for heating domestic hot water.
Unlike gas boilers, electric boilers do not require any sort of compulsory maintenance. We, as the manufacturer, recommend the boiler’s power cables, electricity consumption and pressures to be checked.